Mixing Systems
Difficult to mix materials use Dynamic Static Mixers. The dynamic static mixers is a combination of dispensing valve and a drive motor. The motor rotates the mixer element in the plastic tube. The drive is either pneumatic or electric. Static-dynamic mixers run without flushing agents because the components are supplied to the mixer tube intake separately.
Mixing of the two components shall be done with a dynamic static mixer. This unit is specifically designed for materials where additional sheer needs to be introduced to insure thorough mixing. The two components remain separate until entering the mixer. Only then does homogeneous mixing of the two components takes place. The mixer is fastened to the gun and remains stationary. As the material is dispensed, the mixing element inside the mixer rotates at a high speed, thoroughly mixing and blending the materials. (Solvent/material purge optional but not required with disposable mixers)
Dynamic Mix 3.0
Dynamic mix 3.0 / Dynamic mixer with disposable mixing chamber and two component swivel joint for integration into manual glass sealing applications. PERFECT suited for pasty two compoent materials.
Optionally available as integrated in Ecostar evo-series or as retro-fit kit for existing installations.
Benefits
- Freezer or solvent flushing pump no longer required
- No more loss of material through purging processes
- Saving of costs for disposal of waste material
- No more necessity for cleaning of Z-swivel joint
- No purchase of trumpet mixer required
- Less attrition of the plant by lowering the pressure level to approximately 120 bar
Dynamic Mix 6.0
Dynamic Mix 6.0 / The Dynamic Mix 6.0 combines the technical advantages of a dynamic mixer with the economical benefits of a static mixer. The Dynamic Mix 6.0 requires a controller. Depending on version the mixer will be integrated in parent control or it comes with a retrofit integration kit.
Benefits
- Elimination of purging adhesive losses
- Minimize cost of waste e material
- Saving of costs for disposal of waste material
Tooling Paste Mixer
Tooling Mixer / Dynamic Mixer combines the technical advantages of a dynamic specifically designed for handling pasty two component materials, including polyurethanes and epoxy resins, as well as for successfully processing micro-ball filled materials. It is especially suitable for use in such applications as model making in the automotive, aeronautical and shipbuilding industries as well as sealing and adhesive dispensing.
Contact Us For a Tooling Paste Mixer Quote